Siemens SITRANS L Скачать руководство пользователя страница 18

Страница: 18 / 269

SITRANS LR250 with FOUNDATION FIELDBUS

Operating Instructions, 09/2021, A5E32221411-AH

Description

3.1

SITRANS LR250 overview

WARNING

Loss of protection

Danger to personnel, system and environment can result from improper use of the device.
•

SITRANS LR250 is to be used only in the manner outlined in this manual, otherwise

protection provided by the device may be impaired.

SITRANS LR250 is a 2-wire 25 GHz pulse radar level transmitter for continuous monitoring of

liquids and slurries in storage vessels including high pressure and high temperature, to a

range of 20 meters (66 feet). It is ideal for small vessels, material such as chemicals, food,

beverages, solvents (including those of corrosive or aggressive nature), and low dielectric

media.
The device consists of an electronic circuit coupled to a permanently attached antenna and

either a threaded or flange type process connection.
This device supports Foundation Fieldbus (FF) communication protocol. Signals are processed

using Process Intelligence which has been field proven in over 1,000,000 applications

worldwide (ultrasonic and radar). This device can be configured as an FF (H1) Link Master.

Содержание SITRANS L














































































































































































































































































Результаты поиска

Содержание SITRANS L

Отзывы:

Siemens SITRANS L, Руководство по эксплуатации, Страница: 18 / 269

Результаты поиска

Содержание SITRANS L

Отзывы: