Siemens SIMATIC HMI OP 73micro Скачать руководство пользователя страница 153

Страница: 153 / 188

Appendix

A.2 System alarms

OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0

153

Number Effect/cause

Remedy

40011 The system function could not be executed since

the parameters could not be converted to a

common tag type.

Check the parameter types in the configuration.

50000 The HMI device is receiving data faster than it is

capable of processing. Therefore, no further data is

accepted until all current data have been

processed. Data exchange then resumes.

50001 Data exchange has been resumed.

60000 This alarm is generated by the

“DisplaySystemAlarms” function. The text to be

displayed is transferred to the function as a

parameter.

60010 The file could not be copied in the direction defined

because one of the two files is currently open or the

source/target path is not available.

It is possible that the Windows user has no access

rights to one of the two files.

Restart the system function or check the paths of the

source/target files. Using Windows NT/2000/XP: The user

executing WinCC flexible Runtime must be granted

access rights for the files.

60011 An attempt was made to copy a file to itself.

It is possible that the Windows user has no access

rights to one of the two files.

Check the path of the source/target file.

Using Windows NT/2000/XP with NTFS: The user

executing WinCC flexible Runtime must be granted

access rights for the files.

70010 The application could not be started because it

could not be found in the path specified or there is

insufficient memory space.

Check if the application exists in the specified path or

close other applications.

70011 The system time could not be modified.

The error alarm only appears in connection with

area pointer "Date/time PC". Possible causes:

•

An invalid time was transferred in the job

mailbox.

•

The Windows user has no right to modify the

system time.

If the first parameter in the system alarm is

displayed with the value 13, the second parameter

indicates the byte containing the incorrect value.

Check the time which is to be set.

Using Windows NT/2000/XP: The user executing WinCC

flexible Runtime must be granted the right to change the

system time of the operating system.

70012 An error occurred when executing the function

"StopRuntime" with the option "Runtime and

operating system".

Windows and WinCC flexible Runtime are not

closed.

One possible cause is that other programs cannot

be closed.

Close all programs currently running.

Then close Windows.

70013 The system time could not be modified because an

invalid value was entered. Incorrect separators may

have been used.

Check the time which is to be set.

70014 The system time could not be modified. Possible

causes:

•

An invalid time was transferred.

•

The Windows user has no right to modify the

system time.

•

Windows rejects the setting request.

Check the time which is to be set.

Using Windows NT/2000/XP: The user executing WinCC

flexible Runtime must be granted the right to change the

system time of the operating system.

Содержание SIMATIC HMI OP 73micro





























































































































































































Результаты поиска

Содержание SIMATIC HMI OP 73micro

Отзывы:

Похожие инструкции для SIMATIC HMI OP 73micro

Бренды по названию

Популярные бренды

Siemens SIMATIC HMI OP 73micro, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC HMI OP 73micro

Отзывы:

Похожие инструкции для SIMATIC HMI OP 73micro

Бренды по названию

Популярные бренды