Operating a project
8.2 Operating a project on TP 177micro
OP 73micro, TP 177micro (WinCC flexible)
116
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0
The configuration engineer defines the appearance of a selected field, for example, its
line width and color for the focus.
●
Invisible buttons
The focus for invisible buttons is not identified after selection by default.
The configuration engineer may, however, configure invisible buttons so that their outline
appears when touched. This outline remains visible until the you select another operator
control object.
●
IO fields
After you touch an IO field, a screen keyboard appears as feedback.
8.2.2
Setting the project language
Introduction
The HMI device supports multilingual projects. You need to configure a corresponding
operator control object which lets you change the language setting on the HMI device during
runtime.
The project always starts with the language set in the previous session.
Requirements
●
The relevant project language must be available on the HMI device.
●
The language changeover function must be logically linked to a configured operator
control object such as a button.
Selecting a language
You can change project languages at any time. Language-specific objects are immediately
output to the screen in the relevant language when you switch languages.
The following options are available for switching the language:
1.
A configured operator control object switches from one project language to the next in a
list.
2.
A configured operator control directly sets the desired project language.
Further information on this may be available in your plant documentation.
