Siemens SICAM CMIC, Руководство пользователя

Страница: 231 / 414

Engineering via SICAM WEB
SICAM RTUs, User Manual SICAM CMIC
231
DC8-001-2.09, Edition 08.2016
Example: Setpoint command, normalized
•
In the directory tree, mark the corresponding AO module
•
Click on the side bar left beside the status area, if you want to extend it
•
Mark the row with the desired datapoint
Control area:
•
Select a “New value”
The data format corresponds to the setting of the data point on the I/O module (signal list).
•
Select the “Select before execute“ option
With selection Yes and button you activate the select command. You activate the ex-
ecute command, when you click on the button once more within the adjusted time
(
select_execute_t
).
With selection No and button you activate the execute command directly.
The new process value is transferred to the target device and displayed in the column
Value
.
You find further details in the manual SICAM RTUs Common Functions Peripheral Elements
According to IEC 60870-5-101/104, chapter "Setpoint Values by means of Currents and Volt-
ages", section "Select and Execute Command" .