Siemens SCALANCE XR324-4M EEC Скачать руководство пользователя страница 30

Страница: 30 / 84

WARNING

When used in hazardous environments corresponding to Class I, Division 2 or Class I, Zone

2, the device must be installed in a cabinet or a suitable enclosure.

Safety notices for use according to ATEX and IECEx
If you use the device under ATEX or IECEx conditions you must also keep to the following

safety notices in addition to the general safety notices for protection against explosion:

WARNING

To comply with EC Directive 2014/34/EU (ATEX 114) or the conditions of IECEx, this

enclosure or cabinet must meet the requirements of at least IP54 in compliance with EN

60529.

5.2

Suitable cables for temperatures above 70 °C - cable 50 °C - 70 °C

(ATEX)

WARNING

Suitable cables at high ambient temperatures
If the temperature of the cable or housing socket exceeds 70 °C or the branching point of

conductors exceeds 80 °C, special precautions must be taken.
If the device is operated at ambient temperatures of between 50 °C and 70 °C, only use cables

with a maximum permitted operating temperature of at least 80 °C.

Further notes

CAUTION

Use only approved components
If you use components and accessories that are not approved for SIMATIC NET devices or

their target systems, this may violate the requirements and regulations for safety and

electromagnetic compatibility.

Only use components approved for the SIMATIC NET devices.

Assembling
5.2 Suitable cables for temperatures above 70 °C - cable 50 °C - 70 °C (ATEX)

SCALANCE XR-300M EEC

Compact Operating Instructions, 11/2019, A5E02661176-14

Содержание SCALANCE XR324-4M EEC





















































































Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE XR324-4M EEC, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды