Siemens SCALANCE XR324-4M EEC Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 84

background image

6.7.1.3

Connecting the external 24 VDC power supply

24 V safety extra-low voltage (SELV)

WARNING

● The IE Switch X-300 is designed for operation with safety extra-low voltage (SELV). This

means that only SELV complying with IEC 60950-1 / EN 60950-1 / VDE0805 can be

connected to the power supply terminals.

● The power supply unit for the IE Switch X-300 power supply must meet NEC Class 2, as

described by the National Electrical Code(r) (ANSI/NFPA 70).

● The power of all connected power supply units must total the equivalent of a power source

with limited power (LPS limited power source).

● If the device is connected to a redundant power supply (two separate power supplies), both

power supplies must meet these requirements.

● The signaling contact can be subjected to a maximum load of

100 mA (safety extra-low voltage (SELV) 24 VDC).

● Never operate the device with AC voltage or DC voltage higher than 58 VDC.

NOTICE
Damage to the device due to overvoltage
One of the tests used to attest the immunity of devices of the IE Switches X300 to

electromagnetic interference is the "surge immunity test" according to EN61000 4 5. This test

requires overvoltage protection for the power supply lines. A suitable device is, for example,

the Dehn Blitzductor BVT AVD 24 article no. 918 422 or a comparable protective element.
Manufacturer: DEHN+SÖHNE GmbH+Co.KG, Postfach 1640, D92306 Neumarkt, Germany.
Do not operate the SCALANCE X-300 without suitable overvoltage protection.

Connecting to the power supply (SELV)

● The power supply is connected using a 4-pin plug-in terminal block.
● The power supply can be connected redundantly. Both inputs are isolated. There is no

distribution of load. When a redundant power supply is used, the power supply unit with the

higher output voltage supplies the IE Switch X-300 alone.

● The power supply is connected over a high resistance with the enclosure to allow an

ungrounded set up. The two power inputs are non-floating.

Connecting

6.7 Power supply

SCALANCE XR-300M EEC

Compact Operating Instructions, 11/2019, A5E02661176-14

51

«
...
49
50
51
52
53
...
»

Содержание SCALANCE XR324-4M EEC





















































































Отзывы:

Нет отзывов

Похожие инструкции для SCALANCE XR324-4M EEC

Бренд: TRENDnet Страницы: 2

DSL5068EN(1T1R)

Бренд: Aztech Страницы: 40

Бренд: WABCO Страницы: 29

IPLink 2603 Series

Бренд: Patton Страницы: 120

Бренд: Patton Страницы: 62

Бренд: INNOSILICON Страницы: 11

Бренд: Matrix Switch Corporation Страницы: 48

Бренд: Acces Страницы: 21

Бренд: Hame Страницы: 37

Бренд: Alloy Страницы: 13

CONNECT Box Pro

Бренд: ratiotec Страницы: 12

Бренд: Foscam Страницы: 92

TotalStorageFAStT900

Бренд: IBM Страницы: 112

Бренд: B&B Electronics Страницы: 2

Бренд: Edimax Страницы: 40

Бренд: PheeNet Страницы: 7

Бренд: Luxul Страницы: 8

Бренд: Intellinet Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды