Siemens SCALANCE XR324-4M EEC Скачать руководство пользователя страница 26

Страница: 26 / 84

Meaning in display mode B

LED color

LED status

Meaning

off

Port operating at 10 Mbps.

green

Port operating at 100 Mbps.

orange

Port operating at 1000 Mbps.

If there is a problem on the connection and the type of transmission is fixed (autonegotiation

off), the desired status, in other words the set transmission speed (1000 Mbps, 100 Mbps, 10

Mbps) continues to be displayed. If there is a problem on the connection and autonegotiation

is active, the port LED goes off.
Meaning in display mode C

LED color

LED status

Meaning

off

Port operating in half duplex.

green

Port operating in full duplex.

Meaning in display mode D

LED color

LED status

Meaning

off

The port is not monitored; in other words, if a link is not

established at the port, this does not trigger the signaling

contact.

green

The port is monitored, in other words, if no connection was

established at the port (for example no cable inserted), this

triggers the signaling contact and an error state results.

orange

The port is monitored, in other words, when a valid con‐

nection exists at the port (for example non-permitted cable

inserted), this triggers the signaling contact and an error

state results.

4.5

C-PLUG

4.5.1

Area of application and function of the C-PLUG

Area of application

The C-PLUG (configuration plug) that ships with the product is an exchangeable memory

medium for storing the configuration data of the device. The device can also be operated

without a C-PLUG.
This allows fast and uncomplicated replacement of a device. The C-PLUG is taken from the

previous device and inserted in the new device. The first time it is started up, the replacement

device has the same configuration as the previous device except for the MAC address set by

the vendor.

Device description
4.5 C-PLUG

SCALANCE XR-300M EEC

Compact Operating Instructions, 11/2019, A5E02661176-14

Содержание SCALANCE XR324-4M EEC





















































































Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE XR324-4M EEC, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды