Siemens SCALANCE XR324-4M EEC Скачать руководство пользователя страница 34

Страница: 34 / 84

19" rack mounting

CAUTION: If you install a rack device with components

inserted.

The locking mechanisms of components installed in the

rack device (for example the handles of media modules or

the clips on the SFP) must be closed.

See also installation of modular devices:

- Installing media modules in a slot

- Installing an SFP in an SFP media module.

SCALANCE XR324-4M EEC

Insert the rack device in the 19" cabinet and hold the rack

device at the required height. Make sure that nothing is

obstructing air from entering the ventilation grilles.
Fit the securing screws to the two mounting brackets to

secure the rack device in the 19" cabinet.

Connect the grounding bolts. On the SCALANCE

X-300EEC, the PE connector is on the bottom of the de‐

vice. On the SCALANCE XR-300M EEC, the PE connec‐

tor is on the rear of the device between the power con‐

nectors.

Fit the connectors for the power supply.

Note that the SCALANCE X-300 is available for different

power supplies (100 to 240 V AC and 24 V DC variants).

Fit the remaining connectors, for example the signaling

contact.

Removal

Removing from the rack
1.

Turn off the power supply for the SCALANCE XR-300M.

Disconnect all cables for data traffic and the connectors for the power supply and the grounding cable.

Undo the screws on the mounting bracket and remove the rack device from the 19" cabinet.
If necessary, release the locking mechanisms of components inserted in the rack device (for example handles on the

media module or clips on the SFP) to be able to remove the media modules (MM900) or the transceiver (SFP).

Assembling
5.4 19" rack mounting

SCALANCE XR-300M EEC

Compact Operating Instructions, 11/2019, A5E02661176-14

Содержание SCALANCE XR324-4M EEC





















































































Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE XR324-4M EEC, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR324-4M EEC

Отзывы:

Похожие инструкции для SCALANCE XR324-4M EEC

Бренды по названию

Популярные бренды