Siemens SCALANCE W1750D UI Скачать руководство пользователя страница 90

Страница: 90 / 570

Customizing AP Settings

8.2 Configuring Zone Settings on an AP

SCALANCE W1750D UI

Configuration Manual, 02/2018, C79000-G8976-C451-02

8.2

Configuring Zone Settings on an AP

All APs in a cluster use the same SSID configuration including master and slave APs.

However, if you want to assign an SSID to a specific AP, you can configure zone settings for

an AP.
The following constraints apply to the AP zone configuration:

●

An AP can belong to only one zone and only one zone can be configured on an SSID.

●

If an SSID belongs to a zone, all APs in this zone can broadcast this SSID. If no AP

belongs to the zone configured on the SSID, the SSID is not broadcast.

●

If an SSID does not belong to any zone, all APs can broadcast this SSID. You can add

anAP zone by using the UI or the CLI.

Note
For the SSID to be assigned to an AP, the same zone details must be configured on the

SSID. For more information on SSID configuration, see Configuring WLAN Settings for an

SSID (Page 110).

In the SCALANCE W UI

On the Access Points tab, click the AP for which you want to set the zone. The edit link is

displayed.

Click the edit link. The edit window for modifying AP details is displayed.

Specify the AP zone in Zone.

Click OK.

In the CLI

To change the name:

(scalance)# zone <name>

Содержание SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды

Siemens SCALANCE W1750D UI, Руководство по настройке

Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды