Siemens SCALANCE W1750D UI, Руководство по настройке

Страница: 171 / 570

Captive Portal for Guest Access
13.3 Configuring Wired Profile for Guest Access
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
171
– Network Assigned: Select this option to allow the clients to receive an IP address from
the network to which the VC is connected. On selecting this option, the New button to
create a VLAN is displayed. Create a new VLAN if required.
If the Trunk mode is selected:
–
Specify the Allowed VLAN, enter a list of comma separated digits or ranges: for
example, 1,2,5 or 1– 4, or all. The Allowed VLAN refers to the VLANs carried by the
port in Access mode.
– If the Client IP Assignment is set to Network Assigned, specify a value for Native
VLAN. A VLAN that does not have a VLAN ID tag in the frames is referred to as
Native VLAN. You can specify a value within the range of 1–4093.
If the Access mode is selected:
–
If the Client IP Assignment is set to Virtual Controller Assigned, proceed to step 2.
– If the Client IP Assignment is set to Network Assigned, specify a value for Access
VLAN to indicate the VLAN carried by the port in the Access mode
6. Click Next to configure internal or external captive portal authentication, roles, and access
rules for the guest users.
In the CLI
To configure the settings for the wired profile:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# type <guest>
(scalance)(wired ap profile <name>)# speed {10|100|1000|auto}
(scalance)(wired ap profile <name>)# duplex {half|full|auto}
(scalance)(wired ap profile <name>)# no shutdown
(scalance)(wired ap profile <name>)# poe
(scalance)(wired ap profile <name>)# uplink-enable
(scalance)(wired ap profile <name>)# content-filtering
(scalance)(wired ap profile <name>)# spanning-tree
To configure VLAN settings for a wired profile:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# switchport-mode {trunk|access}
(scalance)(wired ap profile <name>)# allowed-vlan <vlan>
(scalance)(wired ap profile <name>)# native-vlan {<guest|1…4095>}
To configure a new VLAN assignment rule:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# set-vlan <attribute>{equals|not-equals|starts-
with|ends-with|contains|matches-regular-expression} <operator> <VLAN-ID>|value-of}