Siemens SCALANCE W1750D UI Скачать руководство пользователя страница 286

Страница: 286 / 570

DHCP Configuration

16.1 Configuring DHCP Scopes

SCALANCE W1750D UI

286

Configuration Manual, 02/2018, C79000-G8976-C451-02

Based on the type of distributed DHCP scope, configure the following parameters:

Parameter

Description

Name

Enter a name for the DHCP scope.

Type

Select any of the following options:

•

Distributed, L2—On selecting Distributed, L2, the VC acts as the DHCP

server but the default gateway is in the data center. Traffic is bridged into

VPN tunnel.

•

Distributed, L3—On selecting Distributed, L3, the VC acts as both DHCP

server and default gateway. Traffic is routed into the VPN tunnel.

VLAN

Specify a VLAN ID. To use this subnet, ensure that the VLAN ID specified

here is assigned to an SSID profile. For more information on SSID profile

configuration, see Configuring VLAN Settings for a WLAN SSID Profile (Pa-

ge 117) and Configuring VLAN for a Wired Profile (Page 149).

Netmask

If Distributed, L2 is selected for the type of DHCP scope, specify the subnet

mask. The subnet mask and the network determine the size of subnet.

Default router

If Distributed, L2 is selected for the type of DHCP scope, specify the IP ad-

dress of the default router.

DNS server

If required, specify the IP address of a DNS server.

Domain name

If required, specify the domain name.

Lease time

Specify a lease time for the client in minutes within a range of 2–1440

minutes. The default value is 720 minutes.

Dynamic DNS

Select the Dynamic DNS check box to enable dynamic DNS on the Distribut-

ed, L3 client.
Key—Enter the TSIG shared secret key.

IP Address Ran-

Specify a range of IP addresses to use. To add another range, click the +

icon. You can specify up to four different ranges of IP addresses.

•

For the Distributed, L2 mode, ensure that all IP ranges are in the same

subnet as the default router. On specifying the IP address ranges, a sub-

net validation is performed to ensure that the specified ranges of IP ad-

dress are in the same subnet as the default router and subnet mask. The

configured IP range is divided into blocks based on the configured client

count.

•

For the Distributed, L3 mode, you can configure any discontiguous IP

ranges. The configured IP range is divided into multiple IP subnets that are

sufficient to accommodate the configured client count.

NOTE: You can allocate multiple branch IDs (BID) per subnet. The AP gener-

ates a subnet name from the DHCP IP configuration, which the controller can

use as a subnet identifier. If static subnets are configured in each branch, all

of them are assigned the with BID 0, which is mapped directly to the config-

ured static subnet.

Option

Specify the type and a value for the DHCP option. You can configure the or-

ganization-specific DHCP options supported by the DHCP server. For exam-

ple, 176, 242, 161, and so on. To add multiple DHCP options, click the + icon.

You can add up to eight DHCP options.

Click Next

Specify the number of clients to use per branch. The client count configured for a branch

determines the use of IP addresses from the IP address range defined for a DHCP

Содержание SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды

Siemens SCALANCE W1750D UI, Руководство по настройке

Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды