Siemens SCALANCE W1750D UI Скачать руководство пользователя страница 431

Страница: 431 / 570

Uplink Configuration

26.4 Wi-Fi Uplink

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

431

26.4

Wi-Fi Uplink

The Wi-Fi uplink is supported on the Access Point. However only the master AP uses this

uplink. The Wi-Fi allows uplink to open, PSK-CCMP, and PSK- TKIP SSIDs.

●

Both radios can be used to serve clients but only one of them can be used for the Wi-Fi

uplink.

Note
When the Wi-Fi uplink is in use, the client IP is assigned by the internal DHCP server.

Configuring a Wi-Fi Uplink Profile

The following configuration conditions apply to the Wi-Fi uplink:

●

To bind or unbind the Wi-Fi uplink on the 5 GHz band, reboot the AP.

●

If the Wi-Fi uplink is used on the 5 GHz band, mesh is disabled. The two links are

mutually exclusive.

In the SCALANCE W UI
To provision an AP with the Wi-Fi uplink:
1.

If you are configuring a Wi-Fi uplink after restoring factory settings on an AP, connect the

AP to an Ethernet cable to allow the AP to get the IP address. Otherwise, go to step 2.

Click the System link on the SCALANCE W main window.

In the System section, click the Show advanced options link. The advanced options are

displayed.

Click the Uplink tab.

Under Wi-Fi, enter the name of the wireless network that is used for the Wi-Fi uplink in

the Name (SSID) text box.

Select the type of key for uplink encryption and authentication from the Key management

drop-down list. If the uplink wireless router uses mixed encryption, WPA-2 is

recommended for the Wi-Fi uplink.

Select the band in which the VC currently operates, from the band drop-down list. The

following options are available:
–

2.4 GHz (default)

–

5 GHz

Содержание SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды

Siemens SCALANCE W1750D UI, Руководство по настройке

Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды