Siemens SCALANCE W1750D UI Скачать руководство пользователя страница 170

Страница: 170 / 570

Captive Portal for Guest Access

13.3 Configuring Wired Profile for Guest Access

SCALANCE W1750D UI

170

Configuration Manual, 02/2018, C79000-G8976-C451-02

13.3

Configuring Wired Profile for Guest Access

You can configure wired settings for a wired profile by using the SCALANCE W UI or the

CLI.
In the SCALANCE W UI
1.

Click the Wired link under More on the SCALANCE W main window. The Wired window

is displayed.

Click New under Wired Networks. The New Wired Network window is displayed.

Click the Wired Settings tab and enter the following information:
–

Name—Specify a name for the profile.

–

Primary Usage—Select Employee or Guest.

–

Speed/Duplex—Ensure that appropriate values are selected for Speed/Duplex.

Contact your network administrator if you need to assign speed and duplex

parameters.

–

POE—Set POE to Enabled to enable Power over Ethernet.

–

Admin Status—Ensure that an appropriate value is selected. The Admin Status

indicates if the port is up or down.

–

Content Filtering—To ensure that all DNS requests to non-corporate domains on this

wired network are sent to OpenDNS, select Enabled for Content Filtering.

–

Uplink—Select Enabled to configure uplink on this wired profile. If Uplink is set to

Enabled and this network profile is assigned to a specific port, the port will be enabled

as Uplink port. For more information on assigning a wired network profile to a port, see

Assigning a Profile to Ethernet Ports on page 110.

–

Spanning Tree—Select the Spanning Tree check box to enable Spanning Tree

Protocol (STP) on the wired profile. STP ensures that there are no loops in any

bridged Ethernet network and operates on all downlink ports, regardless of forwarding

mode. STP will not operate on the uplink port and is supported only on APs with three

or more ports. By default Spanning Tree is disabled on wired profiles

Click Next. The VLAN tab details are displayed.

Enter the following information.
Mode—You can specify any of the following modes:
–

Access—Select this mode to allow the port to carry a single VLAN specified as the

native VLAN.

–

Trunk—Select this mode to allow the port to carry packets for multiple VLANs

specified as allowed VLANs.

Specify any of the following values for Client IP Assignment:
–

Virtual Controller Assigned: Select this option to allow the VC to assign IP addresses

to the wired clients. When the VC assignment is used, the source IP address is

translated for all client traffic that goes through this interface. The VC can also assign

a guest VLAN to a wired client.

Содержание SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды

Siemens SCALANCE W1750D UI, Руководство по настройке

Результаты поиска

Содержание SCALANCE W1750D UI

Отзывы:

Похожие инструкции для SCALANCE W1750D UI

Бренды по названию

Популярные бренды