Siemens MOBILETT XP Скачать руководство пользователя страница 17

Страница: 17 / 109

Safety

MOBILETT
SPR8-230.621.01.03.02

of 106

Original accessories

To ensure product safety, use only original Siemens accessories or accessories
approved by Siemens that comply with standards and statutory regulations (IEC/
EN 60 601-1 resp. IEC/EN 60 601-1-1).

The operator is responsible for any damages caused when accessories not
approved by Siemens are used.

Explosion Protection

The MOBILETT is not intended for operation in areas prone to explosion.

Transport

Prior to Transport

Before transporting the unit, ensure that:

❏

The arm system is lowered and secured by the transport safeguard.

❏

The power cable is disconnected from the wall outlet and wound into the
cable winder.

❏

The parking brake is released.

Warning Label Trans-

port

Do not use the MOBILETT to open doors. During transport, avoid bumping the
wheels or the tube assembly into sharp edges/corners.

Damage to the accessories.

◆

Turn the MOBILETT around and move it backwards through doors and narrow
rooms.

◆

Always be careful during transport of the unit, especially in the vicinity of the
patient.

Contact Siemens customer service for more information.

MOB00013

Содержание MOBILETT XP














































































































Результаты поиска

Содержание MOBILETT XP

Отзывы:

Похожие инструкции для MOBILETT XP

Бренды по названию

Популярные бренды

Siemens MOBILETT XP, Инструкция по эксплуатации

Результаты поиска

Содержание MOBILETT XP

Отзывы:

Похожие инструкции для MOBILETT XP

Бренды по названию

Популярные бренды