manualshive.com logo in svg

Siemens MOBILETT XP, Инструкция по эксплуатации, Страница: 15 / 109

Поделиться
Скачать
Siemens MOBILETT XP Скачать руководство пользователя страница 15

Safety

MOBILETT
SPR8-230.621.01.03.02

13 

of 106

 

Radiation Protection 

  

For the patient

❏

Keep the radiation field as small as possible.

❏

Provide the best possible protection for reproductive organs (gonad protective 
caps or lead-rubber covers) during exposure in the vicinity of these organs.

❏

Please make sure that there is the maximum possible distance between focus 
and skin of the patient.

For the operating

personnel

❏

When releasing the exposure, there must be the maximum possible protec-
tive distance between the operator and the source of radiation.

❏

Wear protective clothing (lead-rubber apron), if you must be in close vicinity to 
the patient during an exposure.

❏

Wear a radiation monitoring badge or a pen dosimeter if necessary.

For the patient and the

operating personnel

❏

When operating the remote control make sure that there are no other running 
infrared remote controlled systems in line-of-sight. This includes systems 
behind a window or lead glass.

❏

Please note that certain materials can lead to increased radiation exposure 
(e.g. parts of the operation table), if they are located in the beam path.

Содержание MOBILETT XP














































































































Отзывы:

Нет отзывов