Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 85

Страница: 85 / 131



Only one PERU or PPU can be located in the examination room!

Two ECG and respiratory sensors in the examination room
interfere with one another in signal transmission. It is not
possible to determine the results.

Patient monitoring

systems are optional accessories and are not part

of the PMU.



The Physiological Measurement Unit may be used only for
controlling MR measurement sequences. The unit does not
replace a patient monitoring system.

The wireless PERU simultaneously acquires three ECG channels as
well as the respiratory channel of the patient.

(1) ECG leads with clips

(2) Plug for respiration cushion

(3) Transmitter unit

(4) Control LEDs

The ECG electrodes and respiratory cushion are connected to the
PERU.



To prevent skin irritations, the PERU has to be located in the
application cushion during the examination.

ECG and respiratory sensor

(PERU)

Physiological imaging

MAGNETOM Skyra

fit

| syngo MR E11

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы:

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 85 / 131

Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы: