Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 43

Страница: 43 / 131

After the Magnet Stop switch has been pressed, an alarm is triggered
at the alarm box. The WARNING LED will light up and an alarm signal
will sound.



As a rule, Siemens Service must be called following a quench.
The magnet must only be put back into operation by Siemens
Service personnel.



WARNING

Formation of droplets due to condensation during quenching!

Personal injury

Risk of fire

◆

Do not touch the exhaust line.

◆

Do not stand under the exhaust line.

◆

Avoid open flames and do not smoke.



WARNING

System indicates Magnet Stop error!

Hazardous conditions because the magnet cannot be
quenched in case of emergency

◆

Immediately remove the patient from the magnet.

◆

Restrict the access to the examination room.

◆

Notify Siemens Service.

Safety

MAGNETOM Skyra

fit

| syngo MR E11

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы:

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 43 / 131

Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы: