Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 131

Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 63



WARNING

Patient rescue during emergency situations, e.g. quench with
failing quench pipe, fire with strong smoke development,
emergency situation involving patient (e.g. heart attack) and
simultaneous power failure!

Personal injury

◆

After releasing the emergency release, pull the tabletop with
the patient manually out of the magnet.

1

Pull the Emergency release (location is indicated by a label)
outward up to the end stop.

The MR measurement is terminated and the table loses the
referenced position.

2

Turn up the pull-out handle and pull the tabletop out of the
magnet.

3

Rescue the patient.

✓

The error regarding the power supply and/or the motorized drive
has been removed.

1

Press the Emergency release back into its original position while
shifting the tabletop slightly in any direction until it audibly locks
into position.

2

To reset the table, simultaneously press the Table Up/Inward
button and the Table Down/Outward button fully.

Resetting the Emergency

release

MR system components

3

MAGNETOM Skyra

fit

| syngo MR E11

63

Print No. M6-04401.621.02.02.02

«
...
61
62
63
64
65
...
»

Содержание MAGNETOM Skyra fit




































































































































Отзывы:

Нет отзывов