manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 59 / 131

Поделиться
Скачать
Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 59

Make sure that no liquids such as contrast medium, blood, or
cleaning agents get into the table connections.

The following connections are located at the foot end of the patient
table:

(1) Headphones

(2) Vacuum cushion

(3) Squeeze bulb

(4) Placeholder [Intended for future use]

The paper roll holder can be mounted at the foot end of the table
below the handle. It includes a holder to reposit the headphones and
can be removed if required. To replace the paper roll (disposable),
you need to detach the headphone holder. If you remove the stick on
the paper roll, you can pull out the right mounting bracket. Then you
can replace the roll and let the bracket again lock into place.

Operating the patient table

The patient table can be controlled via the movement buttons and
the jogwheel on the larger control unit. (

 Page 54 Control units)

Please note that this section only describes the operation of the
patient table. For details on positioning the patient, see: 

Operator

Manual Coils

Connections

Paper roll holder

3.4.2

MR system components

3

MAGNETOM Skyra

fit

 | syngo MR E11

59

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Отзывы:

Нет отзывов