Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 28

Страница: 28 / 131



WARNING

Improper patient transport with the dockable patient table,
improper use of the side rails!

Injury to the patient

Damage to the patient table

◆

Carefully transport the patient on the dockable patient table.
Secure the patient if necessary.

◆

Do not pull/push the tabletop or use the emergency release to
avoid any unintended horizontal movement.

◆

Use the side rails as intended (as an arm rest or in the vertical
position e.g. for securing the patient). Always make sure that
the side rails are completely engaged after moving them and
consider possible pinching parts on the side rails.

◆

Fold the side rails down to move the tabletop.

The risk of stumbling is related in particular to the unfavorable
routing of cables/hoses of interventional components.



CAUTION

Cable/hoses of interventional components!

Injury to patient and operating personnel

◆

Route cables/hoses of interventional components so that it is
not possible to trip over them.

Compatibility

Among other things, the following hazards or complications may
occur through the use of third-party products during MR
examinations:

◾

Heating of system cables or connection cables

◾

Interference with MR image quality

◾

Malfunctioning of third-party products

Risk of stumbling

2.2.6

Combinations with other

systems, accessories

Safety

MR System | Operator Manual

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы:

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 28 / 131

Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы: