manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 73 / 131

Поделиться
Скачать
Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 73

(1) WARNING LED

(2) POWER LED

(3) SYSTEM ON LED

LED

LEDs light up to indicate

WARNING

Error message, e.g. helium fill level is too
low

POWER

Voltage supply of MR system is satisfactory

SYSTEM ON

The MR system is switched on

1

Check the WARNING LED for alarm messages.

An alarm is present when a yellow LED lights up and/or an alarm
sounds.

2

In case of an alarm: Check the host computer for error messages.
Press the Audio Alarm Off button to silence the alarm, and notify
Siemens Service.

3

Verify that the POWER LED is green.

4

If the POWER LED is not on: Check the power supply of the MR
system.

The POWER LED is off, even though the power supply is
functioning properly?

◆

Notify Siemens Service.

After a power failure, the battery powers the circuit of the
magnet emergency shutdown for another 14 days. During this
time, the magnet can still be quenched i.e. the magnetic field
can be shut down by pressing the Magnet Stop switch in case of
emergency.

After installing remote monitoring, various error messages can be
output centrally (e.g. to the front door or gate):

Checking the LEDs

Remote monitoring

MR system components

3

MAGNETOM Skyra

fit

 | syngo MR E11

73

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Отзывы:

Нет отзывов