Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 66

Страница: 66 / 131

◆

Position the side rails as required: e.g. in a vertical position to
secure the patient, or in a horizontal position as arm supports.

✓

The tabletop is in Home Position.

✓

Brake for the castors is released.

◆

Step completely on the left pedal to undock the table.

The table is removed from the system and can be moved in any
direction.

You can use the side rails to steer the table.

The guiding wheel (5th wheel underneath the table) allows for better
directional stability and easier steering.

(1) Guiding wheel is lifted/deactivated

(2) Guiding wheel is lowered/activated

(3) Table is braked

For turning the table in place, navigating in curves and moving the
table straight ahead, set the lateral pedal to the middle position (2)
to lower/activate the guiding wheel.

For moving the patient table laterally, lift the lateral pedal (position
1) to lift/deactivate the guiding wheel.

Lower the pedal to the lowest position (3) to brake the table.

Undocking the table

Moving the dockable patient

table

MR system components

MR System | Operator Manual

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы:

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 66 / 131

Результаты поиска

Содержание MAGNETOM Skyra fit

Отзывы: