manualshive.com logo in svg

Siemens MAGNETOM Skyra fit, Руководство оператора, Страница: 12 / 131

Поделиться
Скачать
Siemens MAGNETOM Skyra fit Скачать руководство пользователя страница 12

The graphics, figures, and medical images used in this operator
manual are examples only. The actual display and design of these
may be slightly different on your system.

Male and female patients are referred to as “the patient” for the sake
of simplicity.

Intended use

Your MAGNETOM MR system is indicated for use as a magnetic
resonance diagnostic device (MRDD) that produces transverse,
sagittal, coronal and oblique cross sectional images, spectroscopic
images and/or spectra, and that displays the internal structure and/or
function of the head, body, or extremities. Other physical parameters
derived from the images and/or spectra may also be produced.
Depending on the region of interest, contrast agents may be used.
These images and/or spectra and the physical parameters derived
from the images and/or spectra when interpreted by a trained
physician yield information that may assist in diagnosis.

Your MAGNETOM MR system may also be used for imaging during
interventional procedures when performed with MR compatible
devices such as in-room displays and MR Safe biopsy needles.

The MAGNETOM MR system is not a device with measuring
function as defined in the Medical Device Directive (MDD).
Quantitative measured values obtained are for informational
purposes and cannot be used as the only basis for diagnosis.

For the USA only: Federal law restricts this device to sale,
distribution and use by or on the order of a physician.

Your MR system is a medical device for human use only!

1.3

1

Introduction

12

MR System | Operator Manual

Print No. M6-04401.621.02.02.02

Содержание MAGNETOM Skyra fit




































































































































Отзывы:

Нет отзывов