Notes for Editing the File snmpd.cnf
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
E-2
HiPath 3000/5000 V9, Service documentation
snmpd.fm
Trap Destination
●
snmpNotifyTag
Designation that must correspond with the
snmpTargetAddrTagList
(
snmpTagetAd-
drEntry
), so that a trap can be sent.
The value is always “hipath”.
●
snmpNotifyType
Type of traps that are to be sent (trap, about).
For HiPath 5000 always “trap”.
●
snmpNotifyStorageType
Always “nonVolatile” (persistent storage necessary).
snmpTargetAddrEntry <snmpTargetAddrName> <snmpTargetAddrTDomain> <sn-
mpTargetAddrTAddress> <snmpTargetAddrTimeout> <snmpTargetAddrRetry-
Count> <snmpTargetAddrTagList> <snmpTargetAddrParams> <snmpTargetAd-
drStorageType> <snmpTargetAddrTMask> <snmpTargetAddrMMS>
●
snmpTargetAddrName
Any unambiguous identifier for the entry.
String with 1-32 characters.
●
snmpTargetAddrTDomain
Transport type for the entry.
String:
snmpUDPDomain
or
snmpIPXDomain
.
●
snmpTargetAddrTAddress
Destination address for traps.
The format depends on the entry
snmpTargetAddrTDomain
.
For
snmpUDPDomain
: IP a port (for example 192.132.123.98:162), whereby 0
may also be entered as a port. In this case the default port will be used.
●
snmpTargetAddrTimeout
Timeout: Default is 1500. For HiPath 5000, 100 is used.
●
snmpTargetAddrRetryCount
Retry count: Default is 3.
●
snmpTargetAddrTagList
Designation that must correspond with a
snmpNotifyTag
(
snmpNotifyEntry
) so that
a trap can be sent to the given address.
The value is always “hipath”.
●
snmpTargetAddrParams
Designation that refers to an entry in a
snmpTargetParamsEntry
(
snmpTarget-
ParamsName
).
The value is always “v1Params”.
●
snmpTargetAddrStorageType
Always “nonVolatile” (persistent storage necessary).
Содержание HiPath 3000 Series
Страница 1252: ......