Siemens Nixdorf MX300 Series, Руководство по эксплуатации

Страница: 99 / 178

Safety standards
Important notice concerning power cord selection
The power cord for this unit has been packed separately and has been selected
according to the country of destination and must be used to prevent electric shock.
Use the following guidelines if it is necessary to replace the original cord set.
The female receptacle of the cord set must meet CEE-22 requirements and should look
like Figure A below:
For the United States and Canada:
In the United States and Canada the cord must be UL listed and CSA labelled. The
male plug is a NEMA5-15 style (Figure B).
For units which stand on a desk or table, SVT or SJT type cord sets may be used.
For units which stand on the floor, only SJT type cord sets may be used.
The cord set must be selected according to the current rating for your unit. Please
consult Table A for the selection criteria for power cords used in the United States and
Canada.
Cord type
Size of conductors in cord Maximum current rating of unit
SJT 18 AWG 10 Amps
16 AWG 12 Amps
14 AWG 12 Amps
SVT
18 AWG 10 Amps
17 AwG 12 Amps
Table A
U6389-J-Z146-4-7400 5