5.2.4
Mounting device
The device can be mounted using the 2 mounting straps (supplied mounting kit part no.
2105772) after attachment on the device from the front or rear. The associated 2 M5
threaded mounting holes for the fastening clamps are each located on the outside of
the rear of the device, in the recess,
.
Figure 6: Back view of RFU610-107xx: Device with assembled mounting straps
Alternatively, the device is fastened using the two M5 internal threaded mounting holes.
The threaded mounting holes are also located on the rear of the device.
Further, optional SICK brackets
The device can be mounted using additional optional SICK brackets, a combination of
SICK brackets/elements, or a customer-specific bracket.
SICK offers prefabricated brackets which are optimally suited for mounting the device
in a wide range of applications.
Also see on Internet at:
•
NOTE
Dimensional drawings for SICK brackets and, if applicable, mounting instructions can
be found online at:
b
To do so, enter the 7-digit part number of the bracket in the search field.
User-supplied brackets
A user-supplied bracket must meet the following requirements:
•
Stable mounting device
–
Orientation of the device changeable in the x- and y-axis
–
The mounting device must be able to bear the weight of the device, including
connecting cables, in a shock-proof manner,
–
In mounting situations with strong vibrations, it may be necessary to provide
shock mounts.
•
For mounting the device according to the dimensional drawing: 2 suitable holes for
M5 screws.
5.3
Mounting location
When selecting the mounting location, the following factors are significant:
5
MOUNTING
26
O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link
8026854//2021-09-01 | SICK
Subject to change without notice
