Maintenance
44
© SICK AG · Germany · All rights reserved · Subject to change without
notice
8016535/1D2F/2022-11-14
Operating instructions
NAV310 Laser positioning sensor
Chapter
7
7
Maintenance
Important Claims under the warranty rendered void!
The housing screws of the NAV310 are sealed. Claims under the warranty against SICK AG
will be rendered void if the seals are damaged or the device opened. The housing is only
allowed to be opened by authorised service personnel.
7.1
Maintenance during operation
The NAV310 is maintenance-free apart from the maintenance measures listed below. No
maintenance is necessary to ensure the retention of laser class 1.
Recommendation
To obtain the full optical power of the NAV310, the window in the scanner head of the
NAV310 should be regularly checked for contamination. This applies particularly in harsh
operating environments (dust, powder, moisture).
Damage to the optics in the NAV310!
The window in the scanner head on the NAV310 is made of glass. The optical power is re-
duced by scratches and smearing on the front screen.
Do not use aggressive detergents.
Do not use abrasive cleaning agents.
Only use fabric cleaning cloths or paper towels free of wood and fluff.
Avoid scratching and scouring movements on the window.
Performance reduction due to contamination of the window in the scanner head!
Static charges cause dust particles to be attracted to the window of the NAV310. You can
prevent this effect by using the antistatic plastic cleaner (part no. 5600006) and the SICK
lens cloth (part no. 4003353).
Fig. 22:
Window in the scanner head on the NAV310
Window in the scan-
ner head
on the NAV310
