Operating instructions
NAV310
Assembly
8016535/1D2F/2022-11-14
© SICK AG · Germany · All rights reserved · Subject to change without notice
29
Chapter
4
4
Assembly
Important
Do not open the housing for the NAV310. If the housing is opened, any warranty claims
against SICK AG will be rendered void.
4.1
Overview of the mounting steps
•
select mounting method for the NAV310
•
mounting and adjusting the NAV310
4.2
Preparations for mounting
4.2.1
Components to be mounted
•
NAV310 (weight approx. 2.4 kg (5.29 lb)
4.2.2
Material and accessories necessary
•
Fixing bracket by the user:
– Stable mounting bracket that provides adjustable alignment of the NAV310 in the X
and Y axis
– 3 screws M6 for the NAV310, screw length dependent on the wall thickness of the fix-
ing bracket used
4.3
Mounting and adjustment of the device
Risk of damage to the device!
The maximum screw length in the M6 blind threaded hole is 12 mm (0.47 in). Longer
screws will damage the NAV310.
Use screws of suitable length.
The NAV310 has three M6 blind thread holes and is fastened using 3 M6 screws (see
section 9.2.1 “Dimensional drawing NAV310” on page 51
).
For secure mounting at least 3 M6 screws with washers and locking washers are required.
The supply of power must be switched off.
The NAV310 can be fitted in any position.
1. Prepare surface from mounting the fixing bracket for the NAV310 as described in
section 4.2 “Preparations for mounting” on page 29
.
2. Insert screws in the holes in the bracket and screw into the blind threaded hole in the
NAV310. Only tighten screws lightly.
3. The scanner head on the NAV310 must be free to rotate.
4. Align the NAV310.
5. Tighten screws.
6. Check the alignment.
