manualshive.com logo in svg

SICK ICR845-2, Руководство по эксплуатации


Поделиться
Скачать
background image

Operating Instructions 

Chapter 10

ICR845-2

Appendix

8012377/0000/2008-01-30

©

 SICK AG · Division Auto Ident · Germany · All rights reserved

173

CLV-Setup Help

Online help function that provides support for using the CLV-Setup configuration software. 
The help function contains explanations of the ICR845-2 parameters and their valid entries. 
Can be launched directly from CLV-Setup in an HTML browser such as "Internet Explorer

TM

".  

Codegeometrie

Length and height dimensions of the code.

Codeposition (CP value) 

Position of the first dark bar in a detected bar code lengthwise the reading window. Calcu-
lated by the ICR845-2 in the image memory and can be used, for example, to separate bar 
codes with identical data contents. The active evaluation range in the reading window can 
be restricted for   decoding purposes by specifying the maximum and minimum CP values 
of max. two areas of interest for the application.

Command strings, commands

ICR845-2 user interface - alternative to the CLV-Setup configuration software. Basic, yet 
clearly structured command language for modifying the ICR845-2 parameter sets online. 
Accesses the ICR845-2 command interpreter directly. Special programming activities are 
required to use the command strings from the host. CLV-Setup is based on the command 
strings.

Configuration file

File in the CLV-Setup configuration software which archives the entire   parameter set of 
the ICR845-2. Can be printed out in the form of a table.

Data forwarding

Option of forwarding data transmitted by the host transparently to a terminal via the 
ICR845-2 using an identifier. Data can also be forwarded in the opposite direction. Further-
more, this function also allows data received on one of the serial interfaces to be output 
again straight away on one of the same interfaces (echo). Application: forwarding reading 
results or reading pulse commands in pass-through mode, e.g. in a master/slave network.

Data output string

Structured data telegram   in the reading result output by the ICR845-2 on the logical  

 

main data interface (   host interface). Can be physically switched to the serial interface 
(RS 232, RS 422/485), to the CAN interface or to Ethernet interface (port 2112). The output 
can also be suppressed. The structure of the data string is flexible and can be adapted to a 
large extent to the subsequent data processing task. The data output format of the   aux-
iliary interface, on the other hand, cannot be changed.

Decoder, decoding

Code-type-specific evaluation routine for reconstructing the read code in electronic form in 
order to decode its data content.

Download

Method of transferring the   parameter set that was modified with the user interface of the  

 CLV-Setup configuration software offline from the PC to the ICR845-2. CLV-Setup either 

always transfers a complete copy to the memory (RAM) of the ICR845-2 (D

OWNLOAD TO DE

-

VICE

) or just the parameter previously processed using the context menu of the right mouse 

Содержание ICR845-2





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ICR845-2

Element P130BT User Manual preview
P130BT
Бренд: Element Страницы: 120
Kathrein 2220000012 User Manual preview
2220000012
Бренд: Kathrein Страницы: 12
PSC HS1250, Quick Reference Manual preview
HS1250,
Бренд: PSC Страницы: 44
JVC KS-USB10 User Manual preview
KS-USB10
Бренд: JVC Страницы: 2
Unitech MS912 User Manual preview
MS912
Бренд: Unitech Страницы: 109
FAAC XTR B Original Instructions Manual preview
XTR B
Бренд: FAAC Страницы: 24
Cablesson 104026 User Manual preview
104026
Бренд: Cablesson Страницы: 12
HCP QR201 User Manual preview
QR201
Бренд: HCP Страницы: 10
Gemalto Prox-DU Reference Manual preview
Prox-DU
Бренд: Gemalto Страницы: 145
Opticon OPI-2101 Quick Start Manual preview
OPI-2101
Бренд: Opticon Страницы: 4
ENERGY SISTEM eReader Slim HD User Manual preview
eReader Slim HD
Бренд: ENERGY SISTEM Страницы: 7
ENERGY SISTEM eReader Pro Manual preview
eReader Pro
Бренд: ENERGY SISTEM Страницы: 16
ENERGY SISTEM Book 4050 User Manual preview
Book 4050
Бренд: ENERGY SISTEM Страницы: 20
ENERGY SISTEM MP5 Color Book 3048 User Manual preview
MP5 Color Book 3048
Бренд: ENERGY SISTEM Страницы: 28
Datalogic GRYPHON BT Reference Manual preview
GRYPHON BT
Бренд: Datalogic Страницы: 132
LEI Extras MMC/SD Card Reader Installation Instructions Manual preview
MMC/SD Card Reader
Бренд: LEI Extras Страницы: 6
Fujitsu Siemens Computers 11-in-1 Card Reader User Instructions preview
11-in-1 Card Reader
Бренд: Fujitsu Siemens Computers Страницы: 4
Handpoint HiPlus User Manual preview
HiPlus
Бренд: Handpoint Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды