O P E R AT I N G I N S T R U C T I O N S | Bulkscan®
8014829/ZV98/2018-05-07| S I C K
Subject to change without notice
7
ABOUT THIS DOCUMENT
1
About this document
Please read this chapter carefully before you begin working with this documentation
and the Bulkscan® LMS511 or Bulkscan® LMS111.
1.1
Purpose of this document
These operating instructions guide the technical personnel during the safe mounting,
electrical installation, configuration and commissioning as well as during the main
-
tenance of the laser volume flowmeter Bulkscan® LMS511 or Bulkscan® LMS111,
referred to for short as the Bulkscan® in the following.
1.2
Target group
These operating instructions are intended for planning engineers, developers and
operators of plants and systems in which the Bulkscan® is to be used. They are also
intended for people who integrate the Bulkscan® into a machine, initialize its use, or
who are in charge of servicing and maintaining the device.
1.3
Information depth
These operating instructions contain information about the Bulkscan® on the following
topics:
◦
Product description.
◦
Mounting.
◦
Electrical installation.
◦ Commissioning and configuration.
◦
Care and maintenance.
◦
Fault diagnosis and troubleshooting.
◦
Conformity and approval.
When planning and using sensors such as the Bulkscan®, specific technical skills are
required that are not covered by this documentation.
When operating the Bulkscan®, the national, local and statutory rules and regulations
must always be observed.
You can find further information on the Bulkscan® online at www.sick.com.
1.4
Scope
These operating instructions are original operating instructions.
These operating instructions are referring to the following software versions:
Component
Function
Version
LMS511-20190
Firmware
V2.24
LMS111-10190
Firmware
V1.02
SOPAS ET
Configuration software
V3.x
For a table overview of user levels and passwords, see Chapter 7.1.2 Establishing com-
munication with the Bulkscan® LMS511 or Bulkscan® LMS111.
Note:
Note:
