SICK Bulkscan, Руководство по эксплуатации

Страница: 48 / 112

O P E R AT I N G I N S T R U C T I O N S | Bulkscan® 8014829/ZV98/2018-05-07 | S I C K
Subject to change without notice
4 8
ELECTRICAL INSTALLATION
6.2.3 Connection of the digital inputs/outputs of Bullkscan ® LMS511
Fig. 29: Pin assignment of the "I/O" connection (12-pins M12 female connector, A-cod-
ed).
Pin Wire color Signal Function
1 Brown 24 V EXT Power supply digital outputs 3 to 6
2 Blue GND IN Ground digital inputs 1 + 2
3 White IN1 Digital input 1
4 Green GND ENC Ground encoder inputs
5 Pink IN2 Digital input 2
6 Yellow ENC1 Encoder input 1
7 Black GND EXT Ground digital outputs 3 to 6
8 Gray ENC2 Encoder input 2
9 Red OUT3 Digital output 3
10 Violet OUT4 Digital output 4
11 Gray/pink OUT5 Digital output 5
12 Red/blue OUT6 Digital output 6
Tab. 8: Pin assignment of the "I/O" connection
Pre-assembled connection cables with flying leads are available as accessories (see
"12.2 Accessories“ on page 96).
Other connection cables may have different wire colors.
Encoder input 1 is connected to encoder output A (0°).
Encoder input 2 is connected to encoder output B (90°).
6.2.4 Serial interface connection of Bullkscan ® LMS511
Fig. 30: Pin assignment of the "Data" connection (5-pins M12 male connector, A-cod-
ed)
Pin Wire color Signal Function
1 Brown 24 V EXT Power supply digital outputs 1 + 2
2 Blue RD–/RxD RS-422/RS-232