SOCIETA’ ITALIANA COSTRUZIONI ELETTRONICHE S.r.l.
VIA TAZIO NUVOLARI, n° 53 - 55061 CARRAIA - (LU)
W e b s i t e : w w w . s i c e t e l e c o m. i t
ISCRIZ. TRIBUNALE LUCCA N. 8661 - C.C.I.A.A. N. 103668
P. IVA 00871160461 - Tel. 0583 980787 - Fax 0583 981495
E - M a i l : i n f o @ s i c e t e l e c o m. i t
Admin
Upgrade
– management of download of new SW loads (see par. 2.17.1)
Change Password
– allows to modify the system password (see par. 2.17.2)
Logout
– closes the CT session (see par. 2.17.3)
2.7.3
System Status
In the Variable Window area
System Status
is displayed by default when no other windows are
open or by clicking on the System Status tab in the top line of the area.
Three functional areas are displayed.
a) Settings
The parameters displayed in this area are described in Table 2.2.
Note:
All parameters cannot be modified in this window, but to perform any change it is
necessary to open the
System Setting
window (link “Equipment→System Setting” in the Main
menu) (see par. 2.10)
b) Radio Measures
For the following radio parameters displayed in the Summary System Status
Tx Power
Rx Power
RemRx Power
Tx Data rate
Rx Data rate
there are reported the
min, max
and
mean
value measured in the last 15 min. period (moving
measuring window). The operator can restart measurements by the <Clear> button at the
bottom of the area.
c) Alarms
The current status of the functional blocks of the equipment and the active alarms can be
monitored in this area, subdivided by the following functional areas. The display is
automatically refreshed. Alarm and warning indications are in red.
Ethernet
There is a row for each Ethernet port equipped in the system (depending on the system
configuration:
lct, user, mate, poe)
where the current status is displayed and active alarms
are indicated. The current status is a function of the port settings (see par. 2.9) and of the
result of autonegotiation on the interface if enabled.
Radio
There is a row where the current status of the radio subsystem (settings are defined in par.
2.8) is displayed and active alarms are indicated.
Equipment
There is a row where the other active alarms of the equipment are indicated. Housekeeping
Sensors signal are also indicated in this area when the Active.
In Table 2.3 there is reported the list of the Status and Alarms values used in each area.
