SOCIETA’ ITALIANA COSTRUZIONI ELETTRONICHE S.r.l.
VIA TAZIO NUVOLARI, n° 53 - 55061 CARRAIA - (LU)
W e b s i t e : w w w . s i c e t e l e c o m. i t
ISCRIZ. TRIBUNALE LUCCA N. 8661 - C.C.I.A.A. N. 103668
P. IVA 00871160461 - Tel. 0583 980787 - Fax 0583 981495
E - M a i l : i n f o @ s i c e t e l e c o m. i t
If an existing connection with the CT is lost, the alert of Fig. 2.3-b is displayed and the connection
can be re-established clicking on the browser tab and re-entering Username and Password.
Note:
After a period of about 30 minutes when the CT has been inactive the CT connection is released. If
the operator reopens again the CT afterwards, the login windows of Fig. 2.3 is displayed and the operator
user has to login again to access the system, inserting Username and Password.
a
– Alert: another user is already logged
b
– Alert: connection is lost
Figure 2-2: Login Window - Alerts
Note:
To access the Remote Terminal of a link (or the Mate and Remote Terminals in case of 1+1 HSB
configuration) from a CT it is possible to establish the connection to the Local terminal and clicking the link
“External Links→Remote Terminal/Mate Terminal” available in the Main Menu (see par. 2.16).
The Remote Terminal of the link can be reached only if the radio link is in normal operation.
Warning:
Obviously, using the RCT, any terminal can be reached using its own IP address, but in
this case the operator must be careful not to issue commands that could put out of service the
