- 6 -
This product is an air sampler. Do not use the product for any purpose not described in this
manual. Doing so might cause malfunction.
Do not store this product where it will be exposed to direct sunlight, or near fire. Doing so
might cause abnormal operation or malfunction.
If this product is exposed to strong sunlight, the product may become hot. When handling it,
be careful to avoid burning your hands.
Two or more people are required in order to move this product. Using fewer people might
cause accidents.
When rotating and then folding up this product, confirm that the door, canopy and hopper
are locked. Failure to do so might cause malfunction.
When closing the door and canopy, and when connecting the shuttle tube and through pipe,
be careful to avoid pinching your hand or knocking into a piece of equipment with your
body.
Do not place objects on top of this product. Doing so might cause the product to tip over or
deform the product, resulting in accident or malfunction.
Before cleaning or inspecting this product, disconnect the power plug from the power outlet.
Failure to do so might cause electric shock, electric leak or other abnormalities.
Do not use chemicals to wipe down unspecified parts of this product. Also, do not use
unspecified chemicals. Doing so might cause malfunction.
When not using this product, disconnect the power plug from the power outlet. Failure to do
so might cause fire or malfunction.
When disconnecting the power plug, be sure to hold the power cable by the power plug.
Pulling the cable might damage it and cause electric shock or fire.
Before use, check the sheath of the power adapter cable for scratches or other
abnormalities. Also, do not place heavy objects or step on the power cable. Use in an
abnormal state might cause fire or electric shock.
Do not use wires, other metallic objects, or any other connection method not specified in
this manual. Doing so might cause malfunction.
Do not allow water and other liquids, and gases other than air to be sucked in. Also, do not
allow corrosive gases (e.g. salt air) or chemicals to be sucked in. Doing so might cause
malfunction or fire.
Be sure to install a filter in the filter case before operating the product. Malfunction might
result from direct, long term intake of air.
Do not insert screws or other foreign objects into the suction and exhaust ports. Doing so
might cause malfunction. Should foreign objects get inside this product, immediately turn
the power switch OFF, disconnect the power plug, and contact the distributor or your Sibata
representative.
The operating temperature and humidity ranges of this product are 0 to 40
°
C and 10 to
90 % RH (no condensation), respectively. Use of this product outside of these ranges might
impair its performance and service life, resulting in malfunction.
Do not bring this product close to equipment that generates electrical noise. Also, do not
install it at locations subject to string magnetic fields, or lots of dust or humidity. Doing so
might damage the hardware, for example.
Note that, should some nonconformity occur, Sibata does not assume any liability
whatsoever for compensation of data or content that could not be acquired or logged as a
result, loss of data or other content, and other direct and indirect damages relating to the
preceding. Periodically back up data as a precaution against malfunction or accidents.
