- 21 -
Entering 0 hour and 0 minute will engage
manual operation, in which pressing the
[START/STOP]
button will stop operations. The
system will automatically stop however when
the time reaches 999 hours and 59 minutes.
The time can be configured up to 999 hours and 59 minutes.
Setting the Operation End Timer
Press the characters in the operation end timer area to switch between the sampling timer and
the volume timer. The sampling timer, shown onscreen as TIMER, ends the operation after the
configured period of time has elapsed. The volume timer, shown onscreen as VOL., ends the
operation when the configured cumulative flow rate has been reached.
Press the numbers next to TIMER to proceed to the
ending time setting screen, where the ending time
can be set.
Press the regions with the respective numbers for
hours and minutes to proceed to the numerical value
entry screen.
When the numerical values have been entered, the
system will return to this screen.
Press ESC to return to the main screen.
In the numerical value entry screen, press the
numerical keys to enter the desired numerical values.
In this screen as well, press a region with underlined
numbers to change the entry item.
Press
to confirm the numerical values as the
setting values and return to the ending time setting
screen.
Press ESC to cancel entry and return to the
ending time setting screen.
Press CLR to set the numerical value to "0."
Press BS to delete the last figure entered.
