manualshive.com logo in svg

Sibata 080130-1200, Руководство по эксплуатации


Поделиться
Скачать
background image

- 45 -

Warranty and Repair 

This product shall be repaired free-of-charge should it malfunction within one year of 
purchase. When asking for repair, be sure to directly contact the distributor where you 
purchased the product. 
Consumables provided with this product fall outside of the scope of this warranty. Repair of 
the product itself also shall fall outside of the scope of this warranty if any of the following 
causes it to malfunction: 

  Faults or damage resulting from incorrect use 

  Faults or damage resulting from repairs or modifications implemented by parties other than 

Sibata 

  Faults caused by abuse or inadequate maintenance 

  Faults or damage resulting from fires or natural disasters, such as earthquakes 

  Faults or damage resulting from salt or gas damage, or from abnormal voltage 

  Faults or damage occurring after purchase due to relocation, movement, falling, or 

vibration 

  Faults or damage resulting from the use of consumable items not specified by Sibata 

 

 

 Disclaimer  

Should some nonconformity occur during use of this product, Sibata does not assume any 
liability whatsoever for compensation of data or content that could not be acquired or logged 
as a result, loss of data or other content, and other direct and indirect damages (loss of 
business profit, interruption of business, etc.) relating to the preceding. 
Sibata guarantees repair of production malfunctions under fixed conditions. However, Sibata 
has no responsibility for any loss and or damage of data stored on the product. When asking 
Sibata for repair or other services, make a backup of any required data. Sibata does not 
assume any liability whatsoever for any damages that may occur accompanying loss or 
discarding of data due to infringement of precautions described in this manual or neglect to 
back up data on the part of the customer. 

 

For details of repair after the Warranty has expired, contact the distributor where you 
purchased the product. The product shall be repaired for a fee only if Sibata judges that repair 
shall restore its functions, and its functions can be sustained in the future only in accordance 
with specified methods of use.   
When returning this product for repair, fill in the Trouble Notification Sheet and send this sheet 
together with this product. (See page 47.) 

Содержание 080130-1200

















































Отзывы:

Нет отзывов

Похожие инструкции для 080130-1200

Allflex TSU Quick Start Manual preview
TSU
Бренд: Allflex Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды