manualshive.com logo in svg

Sibata 080130-1200, Руководство по эксплуатации


Поделиться
Скачать
background image

- 4 -

Safety Precautions 

The precautionary information that appears in this operation manual is for ensuring that the 
product is used safely and for preventing injury to you and other people and damage to 
equipment. It is all important for ensuring safety and so be sure to read it thoroughly before 
using the product and observe it during use. 

 

 

Warning Labels

 

In this operation manual, precautionary information is labeled. The degree of damage or 
injury that may occur if the product is used without consideration of the corresponding 
item of precautionary information is indicated by one of three labels: DANGER, 
WARNING and CAUTION. These labels indicate precautionary information that is 
important for ensuring safety and so be sure to observe them. 

 

Labels Indicating Degrees of Damage or Injury 

 

Indicates a potentially hazardous situation which, if not 
avoided, could result in serious injury or possibly death.

 

 

Indicates a potentially hazardous situation which, if not 
avoided, could result in serious injury.

 

 

Indicates a potentially hazardous situation which, if not 
avoided, may result in minor to moderate injury or 
equipment damage.

 

 
 

 

 

Содержание 080130-1200

















































Отзывы:

Нет отзывов

Похожие инструкции для 080130-1200

Бренды по названию

Популярные бренды

Загрузить еще бренды