SHINING 3D - EinScan-Pro series - User Manual - June 2019
114
In this mode, you can:
Check the working distance
Adjust the brightness sensitivity
Insure that the markers are well captured.
Insure that the object has enough geometry features if you do not use markers.
Exit Preview mode and start the scan
OR press
Click Start in software or press the Play button to exit the preview mode and start the
scan
❌
Notes:
Preview mode will start in every new project or when an existing project is imported
After exit preview and start scan, the preview mode is not necessary to show again in this
scanning project.
To access preview mode on a current project, re-open it.
11.3.2.
Brightness
Press twice
Enter/Exit the exposure adjustment menu
When scanning or in Preview mode Press twice Play button, adjust the brightness by
pressing “+/ -” buttons on the scanner, or drag the cursor under the camera preview
to left (-) or the right (+).
Содержание EinScan Pro
Страница 17: ...SHINING 3D EinScan Pro series User Manual June 2019 17 EXScan Pro on the start menu ...
Страница 30: ...SHINING 3D EinScan Pro series User Manual June 2019 30 Add on is required for this function ...
Страница 41: ...SHINING 3D EinScan Pro series User Manual June 2019 41 4 4 Scan Workflow ...
Страница 52: ...SHINING 3D EinScan Pro series User Manual June 2019 52 Browse to load a GMF ...