Shining 3D EinScan Pro, Руководство пользователя

Страница: 104 / 124

SHINING 3D - EinScan-Pro series - User Manual - June 2019 104
Go back to Scan mode selection menu
10.4. Turntable Steps
Turntable step input
Before scanning, set the turntable steps between 2 and 180. The number shows the
times of steps that the turntable will stop and data will be captured during the 360°
full rotation. The default setting, 8 steps, is recommended. You can change the
number of steps according to the features of the objects.
⚠Note: Using more turntable steps will help scan more complete data in some
angles, but NOT more accurate.
10.5. Alignment Condition
Alignment mode selection with the turntable
Select an alignment mode condition for the turntable scan.
10.5.1. Turntable Coded Target Alignment
It is the easiest mode among the four modes for scanning small sized objects. It is
highly recommended to use in cases requiring high accuracy and high resolution. The
turntable coded target alignment works as follows: on every step of the turntable,
the scanner recognizes common coded targets on the turntable to calculate the new
position of the object. At least 4 common targets need to be recognized between 2
neighboring scans.