Shining 3D EinScan Pro, Руководство пользователя

Страница: 10 / 124

SHINING 3D - EinScan-Pro series - User Manual - June 2019 10
1.5. Set Up
Hardware set-up
Plug the data cable on the PC port of the scanner (1). The red dot on the cable should
be on up.
Connect the scanner cable to a USB port (2)
Connect the power cable and power adapter. (3-4)
The camera port is intended for the Color camera [see 9.1.2] or the HD prime [see
11.1.2]
⚠Note: Make sure the cable will stay well plugged in during the operation.
After plugged into the computer, check the Device Manager. The scanner should be
displayed like the following picture: under Imaging devices or Cameras, 2 “Microview
MMVC1500MF Camera”
Device Manager, display of the scanner
Other cameras should be disable, Right click > disable device.
After the scan, right click > enable device, Windows will run the driver again.
2
3
4
1