SHINING 3D - EinScan-Pro series - User Manual - June 2019
109
HD prime
+Allen Key *1
❌
Note:
HD prime is available only for EinScan Pro+
11.1.2.
Specifications
Frame Rate
Use Distance
Supported OS
Operating Environment
Sensor Size
10 fps
400-600mm
Windows 7
,
8.1
,
10
,
64bit
Indoor
110mm*34mm*51mm
(
L
×
W
×
H
)
❌
Warning:
Prime uses Class 1 infrared laser. Class 1 laser is safe under normal use. It means the
maximum permissible exposure is not exceeded when viewing with naked eye. But we suggest to
avoid direct exposure to the eyes while scanning. HD Prime is not suggested to use for face
scanning.
11.1.3.
Installation
Before installation, make sure the device is powered off.
Remove the add-on port cover on the top of the scanner. (1)
Screw the color camera into the slot, using the Allen key in clockwise direction (2)
Plug the cable into the Camera port of the scanner, the red dot facing up. (3)
Power on the scanner and the camera driver will start by itself.
(1)
(2)
(3)
Check the device manager to see if the Prime will show as the following
Device manager with EinScan and HD Prime connected
Содержание EinScan Pro
Страница 17: ...SHINING 3D EinScan Pro series User Manual June 2019 17 EXScan Pro on the start menu ...
Страница 30: ...SHINING 3D EinScan Pro series User Manual June 2019 30 Add on is required for this function ...
Страница 41: ...SHINING 3D EinScan Pro series User Manual June 2019 41 4 4 Scan Workflow ...
Страница 52: ...SHINING 3D EinScan Pro series User Manual June 2019 52 Browse to load a GMF ...