Shining 3D EinScan Pro, Руководство пользователя

Страница: 54 / 124

SHINING 3D - EinScan-Pro series - User Manual - June 2019 54
Click Start in software or press the Play button to exit the preview mode and start the
scan
⚠Notes:

Preview mode will start every time a new project is built or an existing project is
imported.

After exiting preview and starting the scan, the preview mode will not be shown
again in this scanning project.

To access preview mode on a current project, reopen it.
6.3.2. Scan Distance
The rangefinder on the left side reveals different colors based on the distance
between the scanner and the object. At the correct distance, it will show green. It
shows red if the distance is too close or blue when the distance is too far.
On the scanner, the information is displayed on the colored LED. As with the
rangefinder on the screen, if it is too close it will show red and if it is too far it will
show blue, and green is perfect.
Adjust the scanner position until the range finder’s color turns green.
Pro Pro+
Closer limit (mm) 300 450
Optimal distance (mm) 400 500
Upper limit (mm) 400 550