Shining 3D EinScan Pro, Руководство пользователя

Страница: 33 / 124

SHINING 3D - EinScan-Pro series - User Manual - June 2019 33
On-screen instruction during calibration step 1
Click Start in the software or press Play button on the scanner to
capture automatically
or play button
During the capture process, LED rings blink and a cross is projected. Move the
scanner from top to bottom or from bottom to top slowly and steadily, until every
step in the rangefinder is green, which means the first capture is complete. The
software will play a beep sign. During capture, lift the scanner up when software
shows “too close”; move the scanner down when software shows “too far”.
⚠Notes:

When the distance bar is ticked, it means pictures of this position are collected.
Blue means the current position.

Keep the cross in the white square area when moving the scanner

During calibration, keep the scanner vertical, not parallel to the calibration
board.

Do not move the board during the capture
When pictures of one position are well collected, the software will turn to the next
position with buzzer as below: