Shimadzu UW2200H, Инструкция по эксплуатации

Страница: 105 / 106

Pressing
[CAL]
key moves to the next menu in the same hierarchy.
( in the table below)
Pressing
[O/T]
key moves to the menu of one hierarchy down.
( in the table below)
When no menu exists in the menu of one hierarchy down, it is fixed.
Pressing
[POWER]
key returns to the menu of one hierarchy up.
(The mass display)
CAL Execution menu
Executes calibration.
WindowsDirect Setting
mark blinks.
Menu Group 1
(
[CAL]
key three times from mass-display)
Sets type of calibration to execute
blinking Sets I-CAL. (Adjusting sensitivity
with the built-in weight) #
1
blinking Sets I-TEST. (Testing sensitivity
with the built-in weight)
2
blinking Sets E-CAL. (Adjusting sensitivity
with the external weight) #
3
blinking Sets E-TEST. (Testing sensitivity
with the external weight)
4
blinking Fully-automatic calibration PSC On/Off
Sets PSC ON # 5
Sets PSC OFF 6
blinking Fully-automatic calibration
Clock-CAL settings
time 1 7
time 2 8
time 3 9
blinking
Executes calibration of the built-in
calibration weight
10
Analog display blinking
Menu Group 2
Menu Group 3
(
[CAL]
key four times from mass-display)
blinking
Full Scale mode #
11
blinking
Taget mode
12
Target value
13
Limit value
14
blinking
Checkweighing Display 1
Checkweighing Display 2
15
Upper threshold
16
Lower threshold
17
blinking 18
Upper threshold 19
Lower threshold 20
blinking
No analog display
21
blinking (
[CAL]
key five times from mass-display)
blinking
Stability and Response
Auto # 22
Pouring 23
Standard 24
Anti-vibration 25
Anti-wind 26
blinking
Stability detection band
1 count # 27
2 count 28
4 count 29
8 count 30
16 count 31
32 count 32
64 count 33
blinking
Tracking
ON # 34
OFF 35
and blinking
Pretaring
Whole lighting at start
36
blinking
holds 37
Does not hold #. 38
blinking
Taring/Printing at Stability
Immediately # 39
Waiting for stabilization 40
blinking
Menu Group 4
(
[CAL]
key six times from gram-display)
mark blinking
Auto Zero
On/Off 41
mark blinking
Auto Print
Loading 42
Loading and unloading 43
Loading and zero
44
Loading, unloading, and zero
45
Continuous 46
Stability with GO 47
blinking
Zero Range
48
blinking
Peak Holding
On/Off 49
blinking
Interval Timer PRINT
Time interval 50
mark blinking
Auto-Memory and Zeroing
52
mark blinking
Animal Weighing
On/Off 53
blinking
Menu Group 5
Menu Group 6
Menu Group 7
(
[CAL]
key seven times from mass-display)
kg kg (kg) 54
mg mg (mg) 55
% %#
pcs Number # (PC) 5
5
7
ct Carat (CT) 58
mom Momme * (MO) 59
T d Solid Specific gravity measurement 60
d Liquid density measurement 61
Lb Pound* 61a
Oz Ounce* 61b
Ozt Troy Ounce* 61c
Hong Kong’s tael* 61d
Singapore tael* 61e
Taiwanese tael* 61f
Malaysia tael* 61g
Chinese tael* 61h
61i
GN Grain* 61j
m Mesgal* 61k
b baats* 61l
t tara* 61m
o parts pounds* 61n
Set the Multiplier for User uni * t (US) 62
blinking (
[CAL]
key eight times from mass-display) .
blinking (Current date)
Current date setting
63
blinking (Current time)
Current time setting
64
blinking
Display during standby setting
Time 65
Date 66
No display # 67
blinking
Report and control setting
CAL report creating
Create 68
Not create # 69
Balance ID
70
PCAL Password
71
blinking
Menu reset to default
72
mark blinking
(
[CAL]
key nine times from gram-display)
blinking
Handshaking
Not provided 73
Software 74
Hardware 75
Timer # 76
blinking
Data Format
EB type # 77
Old EB type 78
PR type 79
IPS type 80
blinking
Baud Rate (Bits/sec)
300 bps 81
600 bps 82
1200 bps # 83
2400 bps 84
4800 bps 85
9600 bps 86
19200 bps 87
38400 bps 88
blinking
Parity & bit length
None (8 bits) # 89
Odd (7 bits) 90
Even (7 bits) 91
blinking
Stop bit
1 bit # 92
2 bits 93
blinking
Delimiter
CR # 94
LF 95
CR+LF 96
WindowsDirect down 97
WindowsDirect right
98
During measurement,
these items are
distinguished by the
position of the symbol
B
A
A
(Unit other than %, PCS,
T
d, and d)
dwt pennyweigh*
6
B
X
(% )
•
•
•
No. : Menu item number
# : Default settings
* : These units cannot be selected in some
countries due to legal restriction.
Menu Map