10
4. Installation
Read These
Pages Before Installation
4
Adjust the level.
This balance has four feet, three of which are
adjustable. For efficient level adjustment, follow
the procedure below.
(1) First, verify that all three leveling screws are at
their shortest point.
(2) While lightly pressing down on the left front of
the balance, turn both of the front leveling screws
to bring the air bubble into the center circle of the
level indicator.
(3) Finally, while still pressing down on the front of
the balance, adjust the leveling screw at the right
rear of the balance until the balance is stable.
5
Insert the four pan supporter caps into the
holes in the top of the balance. Place the pan on
top of them. Positioners of the pan must fit pan
supporter caps in this operation.
6
Before mounting the windbreak, remove the
paper to expose the double-sided tapes on it.
Attach the windbreak to the top of the balance.
The windbreak is a standard accessory for mod-
els with a minimum display of 0.001g.
Level indicator
Level screw
(At the shortest
point when
starting
adjustment)
Level screw
Level
screw
Level indicator
Level screw
(At the shortest
point when
starting
adjustment)
Level screw
Level
screw
Left front
Bubble
Level indicator
Windbreak cover
Double-sided tapes
(3 places)
Windbreak set
Windbreak body
Curved front
Curved front
Pan
Positioners
Pan supporter caps
Large pan model
Small pan model