Shibaura SG280E, Руководство по ремонту

Страница: 93 / 111

89
3) Component parts
(Since this is an originally designed motor, some parts might differ from the actual motor.)
Fig.5-4-25
No. Name No. Name
1 Hub cap 27 Drain plug
2 Split pin 28 Washer
3 Castle nut 29 Intermediate plate
4 Washer 30 Cardin shaft
5 Plug 31 O-ring
6 Brake drum 32 Gear wheel set
7 Wheel bolt 33 Guide pin
8 Brake shoe: A2810 0090 34 Valve drive
9 Spring 35 Channel plate
10 Dust seal ring 36 Disk valve
11 Brake shaft 37 Balance plate
12 O-ring 38 Guide pin
13 Washer 39 O-ring
14 Locking ring (snap ring) 40 O-ring
15 Locking ring (snap ring) 41 Spacer
16 Bush 42 Spring washer
17 Brake lever 43 Seal plug
18 Guide pin (spring pin) 44 End cover
19 Screw 45 Screw
20 Pivot pin 46 Check valve ball
21 Bearing housing 47 Check valve spring
22 Shaft seal 48 Washer
23 Key 49 Check valve plug
24 Taper shaft 50 Name plate
25 Seal ring *A Spare kit: A4089 0010(151F0111)
26
O-ring
* The components of the spare kit are shown in the diagram as 10, 22, 25, 26, 31, 39, and 40.