Shibaura SG280E, Руководство по ремонту

Страница: 18 / 111

15
2) Remove the bypass hose and lower hose from the
water pump .
3) Remove the bolt , and then remove the water pump
and gasket from the engine.
4) Remove the bolt , and then remove the plate and
the gasket from the water pump .
5. Removing the rocker arms and push rods
1) Remove the bolts, and then remove the rocker arm
assembly .
CAUTION: Pay careful attention to the lengths of
the bolts.
2) Pull the push rods out of the cylinders.
CAUTION: Carefully store the caps from the tops of
the valves, to avoid losing them. (See
Fig. 2-4-8.)
6. Removing the exhaust manifold
Remove the nut and bolt , and then remove the
exhaust manifold .
7. Removing the cylinder heads
Equally loosen the bolts two or three times to remove
them, and then remove the cylinder head.
Fig.2-4-8
Fig.2-4-7
Fig.2-4-5
Fig.2-4-6