Shibaura SG280E, Руководство по ремонту

Страница: 38 / 111

35
9. Timing gear case
1) Install the start spring.
2)
While inserting the ring into the hole in the cylinder block,
avoid damaging the oil seals as you assemble the case.
10. Crankshaft pulley
Insert the key into the crankshaft, and assemble the
crankshaft pulley.
Tightening torque for crankshaft pulley nut
N
⋅
m
274.4 to 333.2 (28 to 34kgf
⋅
m)
11. Injection pump assembly
1) Insert the shim that was removed during disassembly,
connect the control rack on the injection pump to the link,
and fix with the snap pin.
2) Tighten the injection pump with bolts and nuts.
Injection pump tightening torque N
⋅
m
12.7 to 16.6 (1.3 to 1.7 kgf
⋅
m)
3) Install the engine stop solenoid.
Fig.2-6-12
Fig.2-6-13
Fig.2-6-14
Fig.2-6-15