Car security systems
57
57
57
57
�
1 second of pulse output which arises before automatic start of engine under control over system ZX-1060.
�
1 second of pulse output which arising at turning of line automatic signal communication on in condition of
automatic start of engine under control over system ZX-1060.
15 – LIGHT (white wire). Pulse 12 V for control over outside light of the car (maximal current 15 A in pulse
condition of commutation). To the wire the diode decoupling is embedded for connection to separate chains of outside
dimensions of the car.
Connect the data of wire to the wires of positive polarity of chains of outside dimensions or
lights of indicators of turning of the car.
16 – constant resource of de12V (red wire which protected fuse 15 A). The wire is used for delivery of strong
built-in chains – control over outside light of the car.
Remark
Remark
Remark
Remark
At connective chains of control over light to lamp of near or far light use supplementary relay.
17 – ARM (-) (orange wire).
Output of signal of negative polarity 500 milliampere (when the system is in protection) –
normally closed relay of blockage of starter (need the installation of supplementary relay).
The wire of system permits
to control over working relay of blockage of starter.
Connect orange wire to contact No.85 relay.
Connect the contact
No. 86 relay with wire of ignition of the car, to which delivery is pr12 V, when the key turns in lock of ignition
to condition “ignition” and “starter”, and 0 V, when the key turns to condition “be turned off”(to the rated wire of the car
yellow wire of system is connected).
Sever weak current wire of solenoid of starter of the car and connect one
termination of severed wire to contact No.87a of installed relay, another termination of severed wire to contact No.30
relay.
Remark
Remark
Remark
Remark
The connection is used in the event of that when closed relay of blockage of starter normally is installed.
At utilization
of that connection of unlocking delivery to protective system goes to that cease to work the function of blockage of
starter, this is to that, in return, permit to start the engine of the car.
18 – SIREN (+) (white wire with black strip). Output of control over siren (+12V). Continue the wire over the hole with
rubber bushing, which has in division among the compartment of engine and cabin of the car, to the place, in which siren
is installed.
Connect white wire with black strip with red wire of siren (controlling 12V).
Adjoin black wire of
siren, to “mass” (metallic accessory of bodywork of the car).
19 – automatic signal communication (+) (yellow wire “ignition” IGN IN).
Input for connection to wire of ig12
V of the car.
Connect the wire to the wire of ignition, to which delivery is pr12 V, when the key turns in lock
of ignition to condition “ignition” and “starter”.
Ascertain that delivery is not promised to that rated wire of the car,
when the key turns in lock to condition “is turned off”.
20 – constant resource of de12 V (red wire with white strip, which protected fuse 5 A).
The wire is used for
delivery of all basic chains of system.
