Car security systems
55
55
55
55
Description
Description
Description
Description of
of
of
of function
function
function
function of
of
of
of wires
wires
wires
wires 20-contact
20-contact
20-contact
20-contact joint
joint
joint
joint of
of
of
of system
system
system
system N1
N1
N1
N1
1.11 – channel CH2 (navy blue/navy blue with black strip).
Output of second channel CH2.Output of control by
channel CH2 is two outputs of normal-turnoff relay with current of loading not more 25 A in pulse condition.
Second
channel is activated according to chosen function F9 of programmable table.
2 – “Mass” (black wire).
Input of energizing (“mass”).
Connect black wire to “mass” (metallic accessory of
bodywork of the car).
Do not jumble that wire with thin black wire of antenna, which is connected to basic block of
system singly, not in wiring harness of wires.
3 – STOP (+) (brown wire with black strip).
Input for connection to wire of control over signals “Stop” of the car of
positive polarity.
4 – TRUNK (-) (bottle green wire with black strip).
Input for connection of terminal switch of negative polarity of
carrier. That wire must connect to terminal switch of carrier, second contact of the one always is connected with “mass”.
System disconnects to the activity of input TRUNK (-) temporarily at activation of supplementary channels of control
over outside equipments CH2, CH3 in condition “protection” and working engine in condition “auto run”.
5 – DOOR (-) (brown wire).
Input for connection of terminal switch of doors of negative polarity (the cars “General
Motors” and majority of the cars of un-American made).
Connect brown wire of system to negative output of terminal
switches of doors of the car.
Remark
Remark
Remark
Remark
Do not connect brown wire of system, if the car has a chain of terminal switches of doors of positive polarity (in the event
of that purple wire of system is connected).
6 – ARM (-) (orange wire with white strip).
Output of signal of negative polarity 500mA (when the system is divested
out of protection) – for control over normal-turnoff relay of blockage (installation of supplementary relay is asked).
7 – DOOR (+) (purple wire).
Input for connection of terminal switches of doors of positive polarity (majority of cars
“Ford” and some cars of un-American made).
Connect purple wire of system to positive output of one of terminal
switches of doors of the car, because in majority of cars terminal switches of doors are connected paralleled.
Remark
Remark
Remark
Remark
Do not connect to purple wire of system, if the car has chain terminal switches of doors of negative polarity (in the event
of that brown wire of system is used).
Chain of delivery light:
Output ARM (-):
Output “Siren”:
Automatic signal communication (+)
+12 V:
Input “SPEEDOMETER (-)”:
Input “TACH/GEN”:
Input “HOOD (-)/TEMP”:
Input “DOOR (+)”:
Output ARM (-):
Red
Orange
White/black
Yellow
Red-white
Bottle green/brown
Green-orange
Navy green
Purple
Orange-white
White
Cambridge blue/yellow
Cambridge blue/red
Cambridge black
Navy blue/black
Navy blue
Black
Brown-black
Navy-green/black
Brown
: Output “light”
: Output CH5 H3
: Output CH5 HP
: Output CH5 general
:CH2 NO-output
: Output CH2 general
: “GND”
: “STOP (+)”
: “TRUNK” (-) (end of carrier)
: Input “DOOR (-)”
